About DSL

900EB(2) Router Setting
-------------------------
Ok open up your DSL Commander and goto Line Config tab

1. Choose RFC2516(PPPoE)
2. PVC - VPi/VCi = 0/35
3. Click Enable NAT
4. LAN IP can leave as default.
5. PPP Authorization put your username : your_username@streamyx and password : yourpassword
6. DNS Discovery is optional.

Finally click on Apply and the modem will save the settings.

For DHCP goto DHCP tab
Fill in all the fields and click Apply the modem will save the settings and close the modem will reset itself without disconnecting.

For FTP in NAT click Inbound and put ftp TCP port21.

Good luck and enjoy!!!

Aztech 305E
-------------
Setup Aztech 305e as Router Mode.


Type admin in the username and leave it blank on password

1. open ur browser and point it to »10.0.0.2[?] and enter admin for username. leave password blank.

2. Click on NAT under Advanced Configurations, and enable it, then click Submit.

3. Click Admin Mode (the one with yellow link).

4. Goto WAN under Configurations. Underv PVC Profile, Set Protocol/Encapsulation to PPPoE LLC

5. under PPP configuration, enter ur username@streamyx and password. Enable Auto Reconnect, and set Enabled to Enabled auto reconnect to ISP when launching web browser.

6. under DHCP Client, enable DHCP Client, and put 1.1.1.1 on Host Name box.

7. Click Apply.

8. Go to DNS under Configurations. Under DNS Proxy Selection, select Use User Configured DNS Server Only, and under User Configuration : , put 202.188.0.133 for preffered DNS and 192.228.128.18 for Alternate DNS (or anything u want..

9. Click Apply.

10. Click Save Settings under Security.

11. Click Save button, and wait ur modem reboot.

step info for client (pc) :

1. make sure u Obtain IP automatically, remove all the gateways, and leave the DNS as is.